We use skin to make leather.
We soak the skin in a special mix.
This helps take away hair and fat.
It makes the skin thick and soft.
This helps make good shoes and bags.
It is a big job!
Do you like wearing leather?
People use skins to make leather.
First, they soak skins in a special mix.
This mix helps take away hair and fat.
It also removes parts of the skin.
This makes the skin swell with water.
The skin gets much thicker and heavier.
It can even double in weight!
This helps the skin stay soft later.
It also lets dyes soak in well.
It is a big job to do.
People use skins to make leather. One part of this is called liming. In liming, skins soak in an alkali solution. This is a mix that is very alkaline.
This mix helps clean the skin. It removes grease and fats. It also removes proteins. One type of protein is called keratin. Keratin is found in hair and scales. The alkali breaks down this keratin. This helps the hair come off.
The mix also helps the skin swell. This is called collagen swelling. Water moves into the skin. The skin gets much thicker. It can even double in weight!
This swelling splits the fiber bundles. The bundles are the small parts of the skin. They burst open because they get too thick. This is good for the leather. It lets dyes and oils soak in better. It also helps with tanning. Tanning is how leather is made. For cattle, this takes 18 hours. In some ways, hair is removed first. Then the skin is limed for 12 to 18 hours.
Liming is a key step in making leather or parchment. It involves soaking animal hides in an alkali solution. An alkali is a substance with a high pH level. This step is part of the beamhouse operations. It helps prepare the skin for later stages. Without liming, the leather would not be right.
This process works in several specific steps. First, the alkali helps remove natural grease and fats. It also removes certain proteins from between the fibers. These are called interfibrillary proteins. The alkali makes these proteins soluble so they can wash away. This prevents the leather from becoming hard or brittle. If these proteins stay, the fibers glue together when dry.
Liming also changes the structure of the skin. The alkali causes something called collagen swelling. This happens because of calcium hydroxide in the mix. Water moves into the hide during this time. The fibers get thicker and also get shorter. This makes the skin much thicker. However, the surface area of the pelt actually decreases.
There are many important facts about how long this takes. For cattle hides, the process usually lasts 18 hours. The skin can even double in weight from the water. This weight gain is from the water uptake. In modern ways, sheepskins are treated differently. The hair is removed before they go into a liming drum. Some hair-save methods lime the skins for 12 to 18 hours.
Finally, the swelling helps split the collagen fiber bundles. The bundle sheath is the layer around the fibers. As the fibers grow thicker, they burst the sheath open. This is very helpful for the maker. It allows better access to the fibers inside. This helps with tanning and dyeing the leather. It also helps with fatliquoring to make it soft.
Liming is a vital chemical process used in leather and parchment manufacturing. It involves soaking animal hides in an alkali solution to prepare them for tanning. This step is a major part of what makers call beamhouse operations. The process uses either a large drum with paddles or a deep pit. Liming serves several important physical and chemical goals. It removes unwanted proteins and natural fats from the skin. It also changes the physical structure of the skin fibers. These changes allow the leather to absorb dyes and oils much better later on.
One primary goal of liming is the removal of interfibrillary proteins. These proteins sit between the fibers of the skin. When an alkali, specifically sodium sulfide, is present, these proteins are denatured. Denaturing means the proteins change their structure so they become soluble. Once they are soluble, they can be washed away from the hide. This removal often happens during a step called deliming, when the pelt is deswelled. If these proteins are not removed, the final leather will be poor quality. It will become hard, tinny, brittle, and inflexible because the fibers glue together during drying.
Liming also works to remove keratin from the skin. Keratin is the protein found in hair, scales, and the epidermis. When the pH level is greater than 11.5, the alkali performs hydrolysis on the keratin. This process cleaves, or breaks, the disulfide bridges found in the protein. While these bridges can reform, the process eventually leads to hair removal. In traditional leather making, unhairing and liming were done at the same time. Modern methods often separate these steps. For example, sheepskins may have their hair removed before they enter a liming drum. In hair-save technology, hides are unhaired first and then limed for 12 to 18 hours.
A major physical change during this stage is alkaline collagen swelling. This occurs because of the presence of calcium hydroxide in the solution. The calcium hydroxide causes an influx of water into the hide or skin. As water enters, the collagen fibers undergo two specific changes. The diameter of each fiber increases, and the fibers themselves become shorter. This causes the overall thickness of the skin to increase significantly. However, as the skin gets thicker, its total surface area actually decreases. This swelling is a fundamental part of preparing the hide for the next stages.
The swelling of the collagen also leads to collagen fiber bundle splitting. The skin is made of bundles of fibers held together by a sheath. As the individual fibers swell and increase in diameter, they take up more space. Eventually, the fiber bundle sheath cannot contain the thicker fibers. The pressure causes the sheath to burst open. This splitting is very important for the quality of the finished product. It provides much better access to the interior fibers. This allows for more effective tanning, retanning, dyeing, and fatliquoring processes.
Timing and weight changes are significant during the liming operation. For cattle hides, the liming process usually lasts about 18 hours. Because of the massive uptake of water during swelling, the weight of the hide changes. The weight of the skin or hide can actually double during this time. However, makers must account for other changes when measuring weight. Some weight is lost as proteins and hair are removed from the skin. Additionally, the fleshing operation is often performed after the liming is complete. This helps manage the total mass of the material.
In summary, liming is a complex chemical and mechanical preparation. It uses high pH levels to break down proteins and swell fibers. By removing keratin and interfibrillary proteins, it ensures the leather remains flexible. By splitting the fiber bundles, it ensures the leather can be properly treated with dyes and fats. Whether using traditional pits or modern drums, liming transforms a raw hide into a prepared material ready for the tanning stage.
Where will your curiosity go next?
More to explore
✨ What else?
Related topics you might enjoy
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.